How to replace the tires mower

mower tires - the main difference

The essential difference in replacing a car tire and flat tire on the mower, is that

* Do not carry a spare with you as you go with the mower.

* The team for the replacement of the tire, like a cat, keys, etc. I'm not with you, they are in their basement laboratory.

* Your house is nearby, then with family members swear.

* You canno hurry to change tires, and no difficulty in finding someone for a vehicle with a flat tire as you would if you leave the vehicle on public roads.

* You can change tires at a better time.

* Depending on tire size, you may need some outside help.

Changing tires

A lawn mower works on an undulating surface. Therefore, if the tire is deflated, if not all tires are inflat surface, do not try to change a flat tire right now. Depending on where the tire is punctured, you can use the following procedure to change anything, but ensure that the spirit of the security is not breached.

If you have a portable compressor with you (even a foot, you do), try to inflate the tires, then change the lawn tractor on a superficial level, flat, better for the tractor. If you're not in the compressor and the flat surfaceNearby, take your tractor, as a condition of the mower flat tire. A lot of resistance. The tire is to take this punishment without complaint.

The procedure to change the tire is as follows.

* You already have a tractor on a flat surface to be bound. Park. Turn off the engine. The parking brake and remove the key from the tractor to avoid a reboot.

* Clean the tires are replaced and the area around the circleWater. These take the powder form of nuts, the tires and reduce the workload of the tires were removed.

* Remove the nuts holding the wheel a bit '. Make a point to make sure all the nuts a bit 'loose. Anyone could still solve a problem later. E 'irreversible. Only to resolve and that is all. If you are unable to convert a single parent should not go beyond. Tighten the nuts in bulk and askprofessional help.

* Fixed wheel brake or slip a piece of wood or stone, so that the wheel can not move. To do this, at least on two wheels.

* Then, place a jack or a team to make the point right on the frame (This position is usually indicated in the manual) and lift the wheel to be replaced).

* Remove all the wheel nuts and remove the wheel. Need help on this point, the wheels are easy to turflarger wheels car.

* Year to date at the end of the wheel, clean the brake drum (if any) and wash the dirt is, remove everything done there.

* Insert a new bike and get the other repaired.

Security

* Wear gloves all the time. This is to prevent injury to hands.

* When you release the shell, special attention is given to a slide of the key. They can cause serious injury to the hand or head, asnot be able to control their movements when a wrench slipped.

* Never change a tire on a wavy surface. There are many cases in which the sequence has slipped from its position on this, and deaths because of the people crushed under a lawnmower.