How to clean your lawn mower safety

Despite the mower very sturdy machines, what to do general cleaning, even if it intends to extend its life. And not just the mower longer operating as effectively for you, simply means that you have a cutting easier.

But you must clean the machine properly if you want to do it safely. Remember, your sharp leaves that can cause serious injuries, and other electrical partsthat can short-circuit when water comes into the wrong pockets.

Fortunately, it's so hard to clean the mower around. All you have to do is follow the tips below ...

The most important advice is to remember that the air filter cover with water before cleaning. If water enters the engine could damage the mower fixed so as to cover the problem, the air intake is essential.

Then we can save time,Your garden hose to spray water all to use the machine to get rid of dirt and grime as you can. Pay particular attention to the underside of the mower that is where most of the cuts and dirt can be found. You want to make sure joints and moving parts are cleaned, and the areas around the wheels.

Sometimes the grass and dirt adhere so strongly to clean the bottom or not, you can even spray them with a garden hose.In this case, you have a scraper to get to work slowly. Scrape the ground from the leaves to stay away, but beware of sharp edges, while there. The connection between motor shaft and the knife is an important part of the mower, so take the time to ensure that the accumulated weeds or vines, which tend to wave around this wind will be deleted.

If this wave is not clean, it is possible that the performance is influenced by the mower. L 'No sound can become the best, or the rate can drop drastically. This is due to friction in the shaft, the shaft of the cleaning is a long way to improve the efficiency and effectiveness of the machine.

After completing all the cleaning, leaving the mower aside to dry completely. Once you are sure that all moving parts are 100% dried, fat is a good idea of ​​the mower with a lubricant. It also helps extend the life of mechanical parts forreduce wear when they rub against each other in working condition.

That's it! Use the above tips and you can have a nice clean cut in no time. And you can save on maintenance costs because they take the mower for longer and break less often.